SmartControl™ Remote Pairing Procedure
For Lowering Trailers with VIN after 3172
1. On the Remote handset - activate the SmartControl™ remote by pressing and holding the two top buttons UP and IN together for approximately 3 seconds.
2. On the SmartControl™ panel - switch OFF the winch 12V MASTER switch.
3. On the SmartControl™ panel - simultaneously press and hold the LIFT WINCH switch UP and the RECOVERY WINCH switch OUT.
4. On the SmartControl™ panel - switch ON the 12V MASTER switch.
5. On the SmartControl™ panel - maintain the hold on the UP and OUT switches for approximately 6 seconds until a beeping sound commences.
(Note: for trailer models with VIN numbers ending in 3172 or earlier, you will need to hold the UP and IN switches instead).
6. On the Remote handset - within 10 seconds of the beeping initiation, press any button. The pairing will conclude successfully upon cessation of the beeping.
Other Resources
Loading articles